8
Total
₹264.79
Subtotal: ₹264.79
Free Shipping on All Orders Over ₹1,000 Not Applicable for 3D Printer Subscription Plans
Best Discounts
₹980.00 Original price was: ₹980.00.₹420.00Current price is: ₹420.00.
₹980.00 Original price was: ₹980.00.₹420.00Current price is: ₹420.00.
₹980.00 Original price was: ₹980.00.₹420.00Current price is: ₹420.00.
₹980.00 Original price was: ₹980.00.₹420.00Current price is: ₹420.00.
₹980.00 Original price was: ₹980.00.₹400.00Current price is: ₹400.00.
₹980.00 Original price was: ₹980.00.₹420.00Current price is: ₹420.00.
The best discounts this week
Every week you can find the best discounts here.
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only(Dark Grey)
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Light Grey)
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Green)
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Brown)
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Yellow)
Otto Robot 3D Printed Compatible With Arduino Plastic parts Only (Orange)
8
Total
₹264.79
Subtotal: ₹264.79
Free Shipping on All Orders Over ₹1,000 Not Applicable for 3D Printer Subscription Plans
1.5-5V DC Vibration Motor with Wire
Description of 1.5-5V DC Vibration Motor with Wire:
- Speed(RPM):19000
- Motor diameter: 6mm
- Shaft diameter: 0.8mm
- Shaft length: 4mm
- Rated voltage: 1.5V-4.5V
ERM Coin Vibration Motor 8mm Dia.,3.4mm Width wire length 26mm
- Product: ERM Coin Vibration Motor
- Operating Voltage: 2.5-3 V DC
- Starting Voltage: 2.3 Max V DC
- Starting Current: 190.0 mA Max
- Rated RPM: 9000 Min RPM
- Rated Vol.: 3.0 V DC
Voltage Detection Sensor Module 25V
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
HC SR505 Mini Infrared PIR Motion Sensor
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
LM393 Sound Detection Sensor Module Black
-
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
Sound Detection Module Sensor
-
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
Infrared IR 1838 Sensor Receiver Module
- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm
TCRT5000 Single Channel Line Tracking Sensor Module
- Operating Voltage: 3-5.5V
- Supply Current: ≥ 20mA
- Optimal Sensing Distance: 3mm
- Working voltage of 5V, the output of the black line low, white line of high output
- Uses Infrared Light to Detect Anti-Interference Ability
- Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
- Exquisite workmanship, with the indicator
- Has a fixed bolt hole for easy installation
Infrared Obstacle Avoidance Sensor Module
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 °
TCRT5000 IR reflex Tracking Sensor Module
- The working voltage: 5V
- A fixed bolt hole for easy installation
- Build-in Tcrt5000 Sensor NSOR
- Applicable to a variety of platforms including Arduino / AVR / ARM /PIC
TCRT5000L 5 Channel Tracking Sensor Module
- High-Quality Tracker Sensor
- The module is a convenient carrier for eight IR emitter and receiver pairs evenly paced.
- Distance between each IR Sensor: 15mm
- Uses 5 sensors for best resolution
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs with a direct connection to microcontrollers
- The array has mounting holes of 3mm diameter for easy mounting
Flame Sensor Module
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
ULN2003A Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
28BYJ-48 Stepper Motor
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
200 RPM Dual Shaft BO Motor Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
100 RPM Dual Shaft BO Motor Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
60 RPM BO Motor L Shape
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
200 RPM BO Motor L Shape
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kgcm
TTP223 Touch Key Module
- Input Voltage : 2 Volt – 5.5 Volts DC
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V
- Sensitivity can adjust by the capacitance(0~50pF)
- Stable touching detection of the human body for replacing traditional direct switch key
- Provides direct mode toggle mode by pad option(TOG pin)
- After power-on have about 0.5sec stable-time, during the time do not touch the keypad, and the function is disabled
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched
PIR Motion Detector Sensor Module HC SR501 Blue
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
- Jumper for trigger.
Filter Products
Recently viewed items
10 E Ohm Metal Film Resistor (Pack of 10)
- Resistance: 10 E Ohm
- Max. Working Voltage: 500 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
- Operating Temperature Range: -40ºC to 125ºC
N20-3V-200 RPM Micro Metal Gear-box DC Motor
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
Fusce sapien urna, tristique non sapien nec, rutrum fringilla eros. Etiam accumsan odio eget tempus consectetur. Aliquam et sapien nulla. Suspendisse lobortis leo ante, imperdiet tristique magna tristique eu. Nullam ultrices vulputate odio, eu iaculis nulla congue quis.
Juicy Oranges up to 1.7kg
4.33
3 Reviews
Fusce sapien urna, tristique non sapien nec, rutrum fringilla eros. Etiam accumsan odio eget tempus consectetur. Aliquam et sapien nulla. Suspendisse lobortis leo ante, imperdiet tristique magna tristique eu. Nullam ultrices vulputate odio, eu iaculis nulla congue quis.
330K Ohm Metal Film Resistor Pack of 10
- Resistance: 330K Ohm
- Max. Working Voltage: 500 V
- Tolerance: 1%
- Temperature Coefficient of Resistance: 50 PPM/°C
- Operating Temperature Range: -40ºC to 125ºC